
TOOLSGSP10
GRS GLENSTEEL PARALLEL FLAT GRAVER, NO.10, 1.0MM, TOOLSGSP10
£18.05
£15.04
The GlenSteel parallel flat, has parallel sides with a flat bottom. These are available from 0.6mm to 2.0mm.
GRS part number #024-239
The GlenSteel parallel flat, has parallel sides with a flat bottom. These are available from 0.6mm to 2.0mm.
GRS part number #024-239
GlenSteel is a special high-speed steel (HSS) that is made by GRS. It features outstanding toughness to be resitant to chipping and breaking even with a slender, fine geometry. GlenSteel wears predictable, this helps to elimate tool failures that might damage work.
This GlenSteel blank is used with GRS Quick Change Tool Holders TOOLSGR3H1 for a pack of 3 or TOOLSGR1BQ for a single bronze tool holder.
Tool Type | Graver |
---|---|
Weight | 0.010000 kg |
Brand | GRS |
We use necessary cookies to make our site work. We'd also like to set optional cookies to help us improve it. We won't set optional cookies unless you enable them. Using this tool will set a cookie on your device to remember your preferences.
Size | XS | S | S | M | M | L |
---|---|---|---|---|---|---|
EU | 32 | 34 | 36 | 38 | 40 | 42 |
UK | 4 | 6 | 8 | 10 | 12 | 14 |
US | 0 | 2 | 4 | 6 | 8 | 10 |
Bust | 79.5cm / 31" | 82cm / 32" | 84.5cm / 33" | 89.5cm / 35" | 94.5cm / 37" | 99.5cm / 39" |
Waist | 61.5cm / 24" | 64cm / 25" | 66.5cm / 26" | 71.5cm / 28" | 76.5cm / 30" | 81.5cm / 32" |
Hip | 86.5cm / 34" | 89cm / 35" | 91.5cm / 36" | 96.5cm / 38" | 101.5cm / 40" | 106.5cm / 42" |
Size | XS | S | M | L | XL | XXL |
---|---|---|---|---|---|---|
UK/US | 34 | 36 | 38 | 40 | 42 | 44 |
Neck | 37cm / 14.5" | 38cm /15" | 39.5cm / 15.5" | 41cm / 16" | 42cm / 16.5" | 43cm / 17" |
Chest | 86.5cm / 34" | 91.5cm / 36" | 96.5cm / 38" | 101.5cm / 40" | 106.5cm / 42" | 111.5cm / 44" |
Waist | 71.5cm / 28" | 76.5cm / 30" | 81.5cm / 32" | 86.5cm / 34" | 91.5cm / 36" | 96.5cm / 38" |
Seat | 90cm / 35.4" | 95cm / 37.4" | 100cm / 39.4" | 105cm / 41.3" | 110cm / 43.3" | 115cm / 45.3" |