Araldite Rapid (Syringe Dispenser) Araldite rapid is a strong, long lasting solvent-free adhesive which is water resistant and can be painted or sanded.
It bonds metal, wood, masonrry, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics.
When applying make sure the surfaces are clean and free from dust, corrosion, dirt and grease. For optimum bonding, slightly roughen the surfaces with sandpaper and degrease metals with a suitable solvent. During assembly, apply light pressure to the joint with tape or clamps until set around 20 minutes. Allow 2 hours rest for the adhesive to fully gain strength before rough handling or sanding. Snap off the resealable cap from between the syringes and break off the end seal, depress the plunger and this will release equal amounts from both tubes (only dispense what you are going to use within 5 minutes, as it will go hard). Mix on a clean and disposable surface for at least 30 seconds. Ensure the metal to be joined is clean and dry. Join the surfaces carefully and remove any excess glue once partially set. During assembly keep the surfaces together (use tape) and apply slight pressure for about 20 minutes, allow 2 hours for complete setting.
This is a long lasting and fast setting glue. Parts are able to be adjusted within 5 minutes.
This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
