SKU
TOOLSAS012

Araldite Standard 2 x 15ml

£6.46
Araldite Standard 2 x 15ml Araldite Standard Araldite Standard is a strong, solvent-free adhesive suitable for all materials, ideal for durable bonding and repairs. Perfect for complicated jobs which require adjustment thanks to a long working time. Slow-drying 2-part epoxy glue.
Araldite Standard Araldite Standard is a strong, solvent-free adhesive suitable for all materials, ideal for durable bonding and repairs. Perfect for complicated jobs which require adjustment thanks to a long working time. It bonds metal, wood, masonrry, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics. When applying make sure the surfaces are clean and free from dust, corrosion, dirt and grease. For optimum bonding, slightly roughen the surfaces with sandpaper and degrease metals with a suitable solvent. During assembly, apply light pressure to the joint with tape or clamps until set around 8 hours. Allow 14 hours rest for the adhesive to fully gain strength before rough handling or sanding. Ensure the surfaces to be glued are clean and dry. Mix equal amounts of both tubes, You should only mix what you can use within 3 minutes, otherwise you will waste the remainder as it will set hard. Apply a thin layer of the mix to one surface, join the other surface and hold tight together for at least 8 hours (use tape) full strength is guaranteed after 14 hours. This glue has a long working time, allowing materials to be re-adjusted for up to 80 minutes. Should be kept in a dry place at room temperature. This item will have to be sent via UK Mail Hazardous Materials & Liquids Only
Specification
Weight 15 gr.
Brand Araldite
Hazard info This item will have to be sent via UK Mail Hazardous Materials and Liquids Only
Write Your Own Review
You're reviewing:Araldite Standard 2 x 15ml
Your Rating
To Top